Measurement Tags

Measurement Tags are a way to further organize and group measurements together in an Area. By Default, all measurements are under the #Default Tag but more can be created when desired. To create a new tag or modify an existing tag

Rename Existing Tag

1. On the Area screen, hold down the tag for 2 seconds.
2. Type in text for new label.
   • 
3. Select anywhere outside of screen to save.

From Existing Measurement (Single)

1. On the Area Screen, select the measurement to enter the Measurement detail page.
2. In the top left of the screen, select the current tag name. 
   • 
3. Enter a name for the new tag or select from an existing tag underneath the input area.
   • 
4. Once entered, select done to confirm tag name.
5. Select "Confirm" at bottom of screen to move measurements to new tag.

From Existing Measurements (Bulk)

1. On the Area Screen, hold the measurement you would like to change tags on. After 2 seconds, a blue circle appears in the top of the Measurement Square.  
   • 
   • Select any additional measurements to be moved to new tag as well while in selection mode
2. Once Measurement(s) have been selected, select the "..." icon 
3. Select the "Tag" button
   • 
4. Enter a name for the new tag or select from an existing tag underneath the input area (be sure to press enter once complete on the keyboard).
   • 
5. Once entered, select done to confirm tag name.
6. Select "Confirm" at bottom of screen to move measurements to new tag.

From New Measurements 

1. Create a Manual Measurement or Angle
   • 
2. In the top left of the screen, click on the "Default" tag 
3. Enter a name for the new tag or select from an existing tag underneath the input area.
   • 
4. Once entered, select done to confirm tag name
5. Select "Confirm" at bottom of screen to move measurements to new tag
6. Save Measurements to complete