If you are having trouble upgrading your T1 Tomahawk Tool, the below steps can be used to help ensure you have the latest firmware on your T1 Tomahawk. On certain occasions, it may take more than one attempt at upgrading the T1 Tomahawk to correctly install the firmware.
- Ensure you have the latest app version installed on your phone. Check the App Store on iOS or the Play Store on Android to ensure no updates are available
- Restart your phone to clear the cache
- Remove and replace battery in T1 Tomahawk
- Ensure phone and T1 are next to one another
- Do not switch applications or touch the phone or T1 during the upgrade process
- Do not press any buttons on the T1 Tomahawk until the Blade Setup screen appears
Comments
Can you do a firmware update without using the app? My phone is too old to connect to the T1 using Bluetooth.
Hello, currently we only support firmware updates through the ROCK App
How do I know if I have Blade Model A or B? It asks you to select after the FW upgrade.
Hello Dan, please see here - https://support.reekon.tools/hc/en-us/articles/21075730938388-Difference-between-Blade-A-and-Blade-B
I just received my T1 and have tried to update the firmware which worked a couple time but after doing the blade calibration it says on the rock app it is only 68% complete and to reinstall the firmware 0.4.9 . once i do the the same thing happens. What do i do now??
Hi Mark, please email us at contact@reekon.tools and we would be happy to help
I tried to update my reekon but it failed with an error 65 I have restarted my phone removed the battery and reconnected the reekon it goes immediately to the error 65 and fails on the firmware up date
Could not fetch firmware file
This is brand new hasn’t been used at all
Hey Dave, please send us an email at contact@reekon.tools
Mines said Could not fetch firmware just got mine hasn’t been used at all
Hello my problem is the same as Dave, I have a brand new tape just updated my T1 tape all my software on my iPhone 14 Pro Max is updated, I have tried turning the tape off and taking the battery out then updating again, I get to setting the tape up with tape B in English but it just will not calibrate and keep getting an error message?
I’m sorted thanks to YouTube 👍 https://youtu.be/YkG4s4mDKv8?si=RRPcOln8uAAi9ihI
Hi Adrian please email us at contact@reekon.tools with your app version as this should have been fixed in the most recent update
Hi Derrick,
New owner of a T1, it seems that the ROCK App doesn't allow the T1 to be updated with the release 0.6.12, neither 0.6.15, nor 1.0.0.
How to do so?
Thanks
---- My T1 setup after unboxing and its first update ----
T1 firmware version : Release 0.5.13 (latest available via the Rock App)
Rock App version : 1.1.44
Hi Regis, please send us an email at contact@reekon.tools with the above information and screenshots and we would be happy to take a look!
Hi Derrick
I too have a T1 version up to 0.5.13 and from 0.6.12 to 1.0.0 cannot be upgraded by the Rock App.
The current Rock version:1.1.46.
HI Massy, please wait up to 48 hours for the new version to show up after updating the app.
My phone says that the TI is rejecting my pairing. My app does not have a tool bar at the bottom of it.
Please sign in to leave a comment.