The M1 Caliber's digital display can display the most commonly used linear units in a large and easy to read format. By default, the M1 Caliber will display units in inch fractional mode with 1/32" resolution. However, by selecting the units button (the middle button with the ruler icon), you can easily toggle and convert measurements as desired. Your measurement unit selection will be saved and will remain as the default value even after the unit is powered off.
| Button Presses | Unit | Abbreviation | Display |
| (Default) | inch fractional (1/32) | in | XXXX XX/XX |
| 1 | feet-inch decimal | ft | XXXX.XX |
| 2 | feet-inch fractional (1/16) | ft | XX XX XX/XX |
| 3 | centimeters decimal | cm | XXXX.XX |
| 4 | millimeters decimal | mm | XXXX.XX |
| 5 | meters decimal | m | XXXX.XX |
| 6 | inch decimal | in | XXXX.XX |
| 7 | inch fractional (1/16) | in | XXXX XX/XX |
- There may appear to be two inches fractional modes. However, they differ by the displayed resolution where the default is 1/32" but users can select 1/16" resolution where speed is more critical
Comments
Please sign in to leave a comment.