The T1M Utility can be measured either from the front reference surface or from the back of the T1M. When capturing an internal measurement, the T1M automatically compensates for the length of the tape measure body and allows the rear reference surface to be used to capture internal measurements.
- Select the Quick Action Menu Button
- Scroll to MBMF.
- Press the Quick Action Menu button again to confirm the selection
- The screen now displays both the rear bracket as well as the internal measurement that the T1M is measuring (and accounts for the length of the T1M body based on which model it is).
To exit MBMF mode, repeat the same procedure. The screen should no longer show the rear bracket, and the measurement readout will match the physical tape blade.
Comments
How do you exit MBMF mode. The exit procedure you advise does not completely exit this mode.
Please sign in to leave a comment.