[BOLDR] Adding a Measurement

Adding measurements in BOLDR Pro can be done from either the desktop web portal or the mobile app. Use measurements to capture lengths or other numeric values inside your projects and templates.

Adding a Measurement on Mobile

1. Open the BOLDR Pro mobile app and select the project you want to edit.
2. Tap the large blue + button in the bottom center of the screen and choose the "Measurements" button under the Quick Input section to add a new measurement to the active job.
3. Enter the measurement value manually or capture it from a connected REEKON or supported device. You can press "Add" to the right of the measurements to continue adding multiple measurements
4. Once you have entered your manual measurements, press "Save All" on the top right of the screen to add your measurements

Adding a Measurement on Desktop

On the desktop web portal, you can add measurements from either the List view or the Board view.

1. Open your project in the BOLDR Pro desktop web portal.
2. Switch to the List view to work with measurements in a table format.
3. At the top of the table header, click + Column.
4. Select Measurement as the column type to create a new measurement column.

5. Alternatively, switch to the Board view to add measurements as cards.
6. Locate the measurement group where you want to add a new measurement.
7. Click the + tile inside that group to create a new measurement card.

Each new measurement column or card represents an individual measurement that can be typed in or captured from connected tools.