[BOLDR] Connecting your REEKON Product to the BOLDR Pro

You can connect your REEKON Tools products to BOLDR Pro using the mobile app so measurements stream directly into your jobs and templates.

Preparing to Connect Your Device

Before searching for devices, make sure bluetooth Permissions are enabled on your mobile device and the REEKON tool is powered on. Make sure your REEKON Device is set to "ROCK App" or "App" mode as it cannot connect to the app in "Keyboard" mode.

Connecting a New REEKON Device

Use the Tools tab in the BOLDR Pro app to discover and connect nearby REEKON devices.

1. Open the BOLDR Pro mobile app and tap the Tools icon in the bottom navigation bar.
2. Tap Refresh to scan for nearby devices.
3. Wait for the REEKON tool you want to connect to appear under Discover nearby devices.
4. Tap the device card to connect it and add it to My Devices.

Forgetting a Connected Device

If you no longer want a REEKON tool associated with your account or need to re-pair it, you can forget the device from the Tools screen.

1. In the Tools tab, locate the connected device under My Devices.
2. Swipe left on the device card to reveal the Forget button.
3. Tap Forget to remove the device from your connected list.

After forgetting a device, you can reconnect it at any time by powering it on, refreshing the device list, and tapping it again in the discovery section.