Derrick Rock
Articles
-
[T1] Does the T1 Tomahawk come with a Calibration Certificate?
No the T1 Tomahawk does not come with a calibration certificate unless you order a specifically calibrated version. Accuracy in digital tape measures is a combination of the blade printing itself ...
-
[T1] Why the Hook Moves at the Tip
Tape Hook Thickness and Play (Movement) You may notice that the T1 blade hook can move between two positions - one extended, one retracted. This is intentional to account for the width of the tape...
-
[T1] Metric Units Availability (cm,mm)
Yes, the T1 Tomahawk is available in metric (pictured in center) with cm and mm markings. Additionally, English/Imperial (pictured top) and Split with both English and Metric markings (pictured bot...
-
[M1] What type of material can the M1 Caliber measure?
The M1 Can measure almost any kind of flat material slid underneath it. The automatically adjusting arm ensures that anything within its actuation range can be properly measured. Here are some tip...
-
[T1] What Is the Yellow StealthMounts Piece in the Package?
The yellow StealthMounts piece included in the T1 Package can be used to mount the T1 to any flat vertical surface including walls, toolboxes, ladder, and more. The T1 or the holster can be mounted...
-
[T1] Is Using the ROCK Jobsite App Required for It to Work?
No, the T1 Tomahawk will work completely on its own, and is a fully functional digital tape measure independent of any apps or smartphone. The ROCK Jobsite App, while not required, enhances the fu...
-
[T1] Can the T1 Display inches decimal instead of inches fractional?
Yes, the T1 Tomahawk can display inches with decimal (along with feet) in addition to inches fractional on its display.
-
[T1] How Do I Register the Device
Your T1 Tomahawk is registered automatically when you connect it to the ROCK Jobsite App for the first time.
-
[T1] Why Does the E-Paper Screen Flash/Invert?
The E-Paper flickering or appearing to temporarily invert is normal part of e-paper technology operation. The e-paper screen refreshes from time to time (approximately every 30 seconds) and during...
-
[M1] Miter Saw Manufacturer Fence Compatibility
A very common question we hear from prospective users is "Can the M1 Caliber attach to my miter saw." The M1 Caliber clamp was designed to work with a variety of saw fences directly rnaging from D...