The Quick Actions Menu on the T1 gives you access to helpful settings that you can enable / disable as needed. It is accessible by hitting the Quick Actions Menu button once, using the up and down arrows to navigate, then selecting the menu button again to select an option. Below is an overview of the available Quick Actions which are covered in more detail in separate topics.
Comments
My Tomahawk with the latest update does not have the layout guide or the create group listed in the
quick start guide
Hey Lance, thanks for reaching out. These features are still currently being refined and will be released in an upcoming update!
Charged battery. An error 1 display on the top screen. Update required connect to app to update firmware on side screen display. Tool is not working at this point. Was a Christmas gift. First attempt at trying to use tool.
hey Pat, please send us an email at contact@reekon.tools and we would be happy to take a look
I just got the tool. Create a group and layout guide aren’t options under the quick action button. I updated the firmware
Hey Mari, these are coming on the next firmware update which we expect to be available soon
Mr. Rock;
Is there a setting what will select the distance from the outside of the Magnetic tip, to the front edge of the tape? (Or Laser line)
Ie. stick the outside of tip (magnet) to a pipe, and measure to the edge of the next pipe using the laser.
I understand it’s probably a 1/16th” but it would be easier to do multiple measurements if there is someway to set. Like automatically subtracting the blade width on the Miter 1!
Thank you;
Collin
Hi Collin, it should measure to the outside of the tip by default? If you want to post on the forum with a picture or diagram, happy to take a closer look as well - https://forum.reekon.tools/
This is alittle old but I think ops issue might be that he is putting the end on a metal pipe and when he pulls on it it extends the tab like he was doing an outside neasure
Please sign in to leave a comment.