[Integration] Importing Measurements into MagicPlan Using a Digital Tape Measure

REEKON Digital Tape Measures can now input measurements directly into MagicPlan! You can follow the process of connecting them here.

1. Turn on your Bluetooth measuring device, then open your project.
2. Open a floor plan.
3. Tap on a room to enter it, and tap on a wall or object.
4. You can access the element's measurements in two ways:
   1. Tap the wall or element you wish to edit, then access the details menu.
      1. On a tablet, tap the "i" icon in the upper right corner. On a mobile phone, swipe up from the bottom of the screen once the element is selected.
      2. Tap on the measurement in the details menu.
   2. Tap the visible blue numeral measurement of the element directly on the floor plan.
5. In the "Change Measurement" pop-up, tap the "Laser" option. You will see a list including "My Devices" and "Nearby Devices." Tap "Connect" next to the model you are using. Once your device is connected, it will be moved to the "My Devices" section.
6. Proceed to measure the distance with your device, then tap "Done".
7. To continue measuring other dimensions with your measuring device, repeat steps 2-5.